ATtiny13A-PU, DIP-8, 20MHz, Flash program memory 1K, 64b EEPROM, 64b SRAM.

RUB 125.4

• High Performance, Low Power AVR® 8-Bit Microcontroller• Advanced RISC Architecture– 120 Powerful Instructions – Most Single Clock Cycle Execution– 32 x 8 General Purpose Working Registers– Fully Static Operation– Up to 20 MIPS Througput at 20 MHz• High Endurance Non-volatile Memory segments– 1K Bytes of In-System Self-programmable Flash program memory– 64 Bytes EEPROM– 64 Bytes Internal SRAM– Write/Erase Cycles: 10,000 Flash/100,000 EEPROM– Data retention: 20 Years at 85°C/100 Years at 25°C– Programming Lock for Self-Programming Flash & EEPROM Data Security• Peripheral Features– One 8-bit Timer/Counter with Prescaler and Two PWM Channels– 4-channel, 10-bit ADC with Internal Voltage Reference– Programmable Watchdog Timer with Separate On-chip Oscillator– On-chip Analog Comparator• Special Microcontroller Features– debugWIRE On-chip Debug System– In-System Programmable via SPI Port– External and Internal Interrupt Sources– Low Power Idle, ADC Noise Reduction, and Power-down Modes– Enhanced Power-on Reset Circuit– Programmable Brown-out Detection Circuit with Software Disable Function– Internal Calibrated Oscillator• I/O and Packages– 8-pin PDIP/SOIC: Six Programmable I/O Lines• Operating Voltage:– 1.8 – 5.5V• Speed Grade:– 0 – 4 MHz @ 1.8 – 5.5V– 0 – 10 MHz @ 2.7 – 5.5V– 0 – 20 MHz @ 4.5 – 5.5V• Industrial Temperature Range• Low Power Consumption– Active Mode:• 190 μA at 1.8 V and 1 MHz– Idle Mode:• 24 μA at 1.8 V and 1 MHz Ссылки по теме Описание контроллера

Чтобы оставить отзыв, нужно авторизоваться. Пожалуйста, войдите с Вашей учетной записью

Войти